Apc Smart-ups 2200 Su2200net User's Manual

 

  1. For UPS installation information, see the Smart-UPS Quick-Start Guide 750/1000/1500/ 2200/3000 VA 120/230 Vac Tower that is included with the UPS. The guide is also available on the enclosed CD and the APC Web site at www.apc.com. Network Management Card For installation information, see the user manual provided with the Network Management Card.
  2. American Power Conversion Corporation (APC) is the leading national and international manufac-turer of state-of-the-art uninterruptible power supplies, redundant switches, power management soft-ware, and related equipment. APC products protect hardware, software, and data from the threat of.
  3. APC Smart-UPS Uninterruptible Power Supply 120 VAC User’s Manual 990-7016B, Revision 3. 2200 and 3000 VA 1000 and 1400 VA 450 and 700 VA Connect Computer Interface Port (Optional). Manual self-tests. During the self-test, the UPS briefly operates the loads on-battery.

About this Manual The APC Smart-UPS. Refer to www.apc.com to contact APC or for additional information about this product. Safety Information Unpacking and Equipment Placement The UPS is heavy. Two people are required to lift the UPS. Select a location sturdy enough to handle the weight of the UPS. Unpack the equipment.

Data Center
Business Networks
Home
Secure Power for Industrial Applications
Power

Power protection solutions from home entertainment to data center to industrial environments.

  • Uninterruptible Power Supply (UPS)
Manual

Apc 2200 Ups

  • Surge Protection and Power Conditioning
Cooling

Cooling solutions for IT equipment from network closets to data centers.

  • Modular Access Floor
  • Containment and Air Distribution
  • Chillers
  • Close Coupled Air Conditioners
  • Room Air Conditioners
Security and Environmental Monitoring

Physical threat monitoring solutions from network closets to data centers.

  • Sensors / Cameras / Licenses / Accessories
  • Security and Environmental Appliances
Racks and Accessories

Racks, enclosures and accessories for IT equipment from network closets to data centers.

  • LCD Monitors and KVM Switches
  • Rack and Enclosure Accessories
  • Racks and Enclosures
Power Distribution

Power distribution and transfer switch solutions for IT equipment from network closets to data centers.

  • Row 3 Phase Power Distribution
  • Rack Power Distribution
Prefabricated Data Center Modules

Apc Smart-ups 2200 Su2200net User's Manual Instructions

Prefabricated Data Center Modules

  • IT Modules
DATA CENTER SOFTWARE

A comprehensive suite of modular and integrated software tools.

  • Monitoring & Control
  • Software Services
  • Operations
Services

Schneider Electric Critical Power & Cooling Services (CPCS) provides the expertise, services, and support you need for your building, industry, power, or data center infrastructure.

Our world-class services offer a smart way to protect your equipment, ensuring that your system is always operating at peak performance, thereby prolonging its lifespan.

Together we can develop a solution to maximize system availability, increase efficiency, and meet your budget.

  • Install
  • Operate
  • Product Based Services
Apc Smart-ups 2200 Su2200net User
Featured collections

Apc Smart Ups 2200

Services
  • Schneider Electric Critical Power & Cooling Services
  • Product Based Services
  • Professional Services
Support
How to Buy

Apc Smart-ups 2200 Manual

Social Media
Learning
Battery Replacement Procedure for Smart-UPS 2200 and 3000 VA Models

Self Test

If the red 'replace battery' LED on the UPS is illuminated, the Smart-UPS may need to have its battery replaced.

Follow the procedure for Smart-UPS replace battery self test to determine if the battery needs to be replaced.

Caution: Please confirm that the UPS is plugged directly into the wall. Excessive temperature may decrease battery life expectancy or cause an incorrect replace battery indicator.


Ordering A New Battery
In-Warranty service:
If you have determined that your UPS requires a new battery and it is in warranty, contact APC support.

Out-of-Warranty options:
If you have determined that your UPS requires a new battery and it is out of warranty, see your dealer or call the APC Replacement Battery Hotline at 1-800-349-4034.

If you would like to trade in your UPS for a new APC unit at a significant discount, read about the Trade-UPS Program.

If you prefer, you can purchase User-Replaceable Battery Cartridges on-line directly from APC.


Battery Replacement Procedure
Note: Please read the warning at the bottom of this page before performing the procedure below.

Tools required: Screwdriver.

Battery replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and loads on for the following procedure. Caution: To avoid personal injury due to energy hazard, remove wrist watches and jewelry such as rings when replacing the batteries. Use tools with insulated handles.


1. Grasp the top edge of the bottom front cover and tilt it out. Unhook the bottom section of the front cover from the chassis and set it aside.
2. Use a screwdriver to remove the two battery door screws and open the door.
3. Grip the wires for the front set of batteries and pull firmly to disconnect the connector from the battery compartment. Grasp the white cord on the front battery connector and pull firmly to remove the first set of batteries. Set aside the foam spacer located between the batteries. Reach into the battery compartment and grasp the white cord on the other battery connector. Pull firmly to disconnect the connector and remove the second set of batteries. Note: Be careful removing the batteries - they are heavy.
4. Slide the first set of new batteries into the unit. Hold the connector down below the top of the batteries and toward the door, otherwise the assembly will not fit. Guide the connector over the top of the batteries and press firmly to connect it to the rear connector of the battery compartment. Note: Small sparks at the battery connectors are normal during battery connection. Set the foam spacer against the rear batteries to prevent the wires from being pinched. Slide the second set of batteries in, then guide the connector over the batteries and press firmly to connect it to the front connector of the battery compartment. Close the battery door, replace the screws, and replace the lower front cover.
5. Dispose of the old battery properly at an appropriate recycling facility or return it to the supplier in the packing material for the new battery. APC supplies pre-paid shipping tags for the return of the batteries to our recycling center. See the new battery instructions for more information.

Apc Smart Ups 2200 Battery

Warning
  • This equipment contains potentially hazardous voltages. Do not attempt to disassemble the unit. The only exception is for equipment containing batteries. Battery replacement using the procedures above is permissible. Except for the battery, the unit contains no user serviceable parts. Repairs are performed only by factory trained service personnel.
  • The batteries in the equipment are recyclable. They contain lead and pose a hazard to the environment and human health if not disposed of properly. Return the battery to a factory authorized service center or refer to local codes for proper disposal requirements.

    CAUTION:

    • Do not dispose of batteries in a fire. The batteries may explode.
    • Do not open or mutilate batteries. They contain an electrolyte which is toxic and harmful to the skin and eyes.
    • To avoid personal injury due to energy hazard, remove wrist watches and jewelry such as rings when replacing the batteries. Use tools with insulated handles.
    • Replace batteries with the same number and type of batteries as originally installed in the equipment.