Hunter Pro C Controller User Manual
- Hunter Pro C Controller User Manual Instructions
- Hunter Pro C Manual
- Hunter Pro C Controller Parts
- Hunter Pro C Controller Owner's Manual
- Hunter Pro C Controller Price
The Hunter Solar Sync is an EPA WaterSense® labeled smart device which calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions, resulting in water savings and conservation. The Pro-C and all AC powered Hunter controllers are now EPA WaterSense labeled when paired with the Solar Sync weather sensor. Hunter PRO-C (PCC) User Manual. Using the pro-c to operate outdoor lighting. Hunter Control panel. Manuals Directory ManualsDir.com - online owner manuals library. L1 and a flashing “OFF” will appear, and the controller is ready to designate lighting programs. Add a start time to lighting program L1 by pressing the j. Controller is connected to Hydrawise and is processing a configuration change Updating Wi-Fi firmware The controller is updating the Wi-Fi firmware to 19.5.4. During this period no configuration changes will be processed by the controller. Updating Pro-C adapter The controller is updating the Pro-C. Hunter Pro-C Pdf User Manuals. View online or download Hunter Pro-C Owner's Manual And Installation Instructions, Product Information. Hunter PRO-C (PCC) User Manual. Hidden features. Hunter Control panel. Manuals Directory ManualsDir.com - online owner manuals library. Hunter manuals. Control panel. PRO-C (PCC) Manual Hidden features – Hunter PRO-C (PCC) User Manual Page 32. This feature allows for a quick way of resetting the.
28
Using the Pro-C to Operate Outdoor Lighting
(optional)
Creating a Lighting Program
1. Turn the dial to the
Pro-C Controller A Complete Family of Full-featured Indoor and Outdoor Residential and Light Commercial Controllers For the end user, for the contractor.there has never been a residential and light commercial controller so remarkably easy to handle as this. Presenting the new Hunter Pro-C Controller. Borrowing the innovative concept of.
START TIMES position.
2. Press and hold the
n
button for 6 seconds and observe the
A, B, C programs moving.
3.
L1 and a flashing “OFF” will appear, and the controller is ready
to designate lighting programs.
4. Add a start time to lighting program L1 by pressing the j and
k
buttons until the correct time is shown. Up to four start
times can be assigned to L1.
5. Turn the dial to the
RUN TIMES position. Press the
n
button
repeatedly until
L1 is shown. Use the j and k buttons to add
a run time to lighting program L1.
If using a second or third lighting transformer, repeat the above
process steps after connecting the additional PXSync boxes and
adding start and run times accordingly.
You do not need to program days of the week for lighting
programs, as they run every day according to the programmed
start and run times.
Hunter Pro C Controller User Manual Instructions
NOTE
Once a start time is assigned to program L1, it turns station 1
from an irrigation station to a lighting station (same for L2 and
L3). As a result, when creating programs for irrigation A, B, or C,
station 1 will show
Hunter Pro C Manual
USED since L1 has been assigned a start time.
Example of screen upon entering
Lighting program can be activated
Example of flashing screen while holding down on
n
button