Salter Brecknell Ws300 Platform Scales User Guide Manual
- Salter Brecknell Ws300 Platform Scales User Guide Manual Free
- Truck Platform Scales
- Salter Brecknell Ws300 Platform Scales User Guide Manual Instruction Manuals
- Mechanical Platform Scales
- Salter Brecknell Ws300 Platform Scales User Guide Manual For Iphone 6 Plus
WS300 light capacity platform scales provide a low cost solution for general purpose weighing of any item up to 300 kg capacity. These well designed low profile machines incorporate four full load bridge loadcells with self levelling, anti-slip feet to give a solid base in use. Brecknell scales are designed and manufactured with focus on high-value, easy-to-use and accurate weighing solutions for the majority of industries worldwide, from industrial weighing equipment, to office and medical scales. Our global presence ensures the highest quality service.
311 Electronic Office Scale
User Instructions
Operation
1.
Place the supplied batteries in the battery compartment on the bottom of
the scale. Be sure to observe battery polarity marked inside the
compartment. Replace the compartment cover.
2.
Place the scale on a flat, stable surface.
3.
Press the ON/TARE button.
When 0 appears, the scale is ready for weighing. See Changing Unit
of Measure below.
4.
Turn the scale off by pressing the OFF button.
To perform a Tare
Salter Brecknell Ws300 Platform Scales User Guide Manual Free
1.
Place a container on the platform for taring and press the ON/TARE
button.
The display will return to zero, eliminating the weight of the container.
2.
Put the material or object to be weighed in the container.
The net weight will be displayed.
3.
Remove everything from the scale.
The display will show a negative weight.
4.
Press ON/TARE again to remove the tare weight.
Scale weight returns to 0.
Auto Off
To save battery power, the scale turns off automatically approximately one and
a half minutes after the last key press or weight change.
Changing Unit of Measure
Press the UNITS button to change the unit of measure from g to kg to lb/oz.
1-1
CHAPTER 1: INTRODUCTION TO THE 200 SERIES DIGITAL INDICATORS
The 200 Series Digital Indicator is a general purpose, industrial grade weight indicator. Five models are
currently available, distinguishable by display type, enclosure type and power supply. Table 1-1 shows
the 200 Series product matrix.
All models operate identically, can readout up to 50,000 display divisions and can supply enough current
for up to 4-350
Ω load cells. All setup parameters may be entered via the front panel keys, including
calibration.
For certain models, an internal 6V rechargeable battery is available as the primary power source. The
external power supply with these units functions as a charger for the rechargeable battery. The power
supply may also be used as the main power supply.
If your Model 200 Series Digital Indicator is part of a complete floor scale or has been installed for you,
you may skip to Chapter 7 for operating instructions. Prior to using the indicator, please read this chapter
carefully and completely. Store the manual in a safe and convenient place so it will be available if you
have questions concerning the operation of the scale.
If you are an installer, the indicator's installation and wiring instructions are found in Chapter 2. The
indicator contains two main setup menus: The Setup (“F”) menu, which configures the indicator to your
weigh platform and the User (“A”) menu, which configures the serial communication port and enables
some user options. Chapter 3 gives an overview and explains how to use the five front panel keys to
maneuver and save settings in both menus. Chapters 4 and 5 explain the Setup and User Menu options,
respectively. Chapter 6 covers system calibration. Prior to installing the indicator, please read this manual
carefully and completely. Store the manual in a safe and convenient place so it will be available if you
have questions concerning the setup and operation of the scale.
MODEL DISPLAY
TYPE
1
ENCLOSURE
TYPE
2
POWER SOURCE
200
LCD
ABS
AC adapter - 12 VDC, 500 mA
200E
LED
ABS
AC adapter - 12 VDC, 500 mA
200ES
LED
Stainless Steel
110/220 VAC, 50/60 Hz
3
200BW
LCD
ABS
6 x “C” (UM-2) batteries
200SL
LCD
Stainless Steel
Internal 6V battery
TABLE 1-1: 200 Series Product Matrix
1
LCD stands for Liquid Crystal Display. LED stands for Light Emitting Diode.
2
Truck Platform Scales
All ABS enclosures are NEMA 12 rated. All stainless steel enclosures are NEMA 4X rated.
Salter Brecknell Ws300 Platform Scales User Guide Manual Instruction Manuals
3
Earlier models shipped with a 12 VDC, 500 mA AC adapter.